Experimental study of interfacial heat flux and surface temperature by inverse analysis with thermocouple (fully embedded) during hot steel strip rolling - École des Ponts ParisTech Access content directly
Journal Articles Advanced Materials Research Year : 2012

Experimental study of interfacial heat flux and surface temperature by inverse analysis with thermocouple (fully embedded) during hot steel strip rolling

Abstract

Knowledge of temperature distribution in the roll is fundamental aspect in cold rolling. An inverse analytical method has been previously developed to determine interfacial heat flux and surface temperature by measuring the temperature with a thermocouple (fully embedded) at only one point inside the roll. On this basis some pilot mill tests have been performed. The temperature sensor, the calibration procedure and rolling tests at different strip rolling conditions (5%, 10%, 15% and 20%) are described. Results show a good agreement with well-known theoretical models. Moreover the CPU times of the method (around 0.05 s by cycle) enable an online control of the rolling process.
Fichier principal
Vignette du fichier
paper_china.pdf (445.42 Ko) Télécharger le fichier
Origin Files produced by the author(s)
Loading...

Dates and versions

hal-00656321 , version 1 (28-01-2012)

Identifiers

Cite

Daniel Weisz-Patrault, Alain Ehrlacher, Nicolas Legrand, Nathalie Labbe, Jaroslav Horsky, et al.. Experimental study of interfacial heat flux and surface temperature by inverse analysis with thermocouple (fully embedded) during hot steel strip rolling. Advanced Materials Research, 2012, 452-453, pp.959-963. ⟨10.4028/www.scientific.net/AMR.452-453.959⟩. ⟨hal-00656321⟩
145 View
646 Download

Altmetric

Share

Gmail Mastodon Facebook X LinkedIn More